8.7.3. Removal and installation of bumpers

For removal of a front bumper disconnect electric wires from fog lamps (are established on separate modifications of cars).

Fig. 8.22. Details of a front bumper: 1 – facing of a bumper; 2 – side arm; 3 – beam; 4 – forward arm

The front bumper of 1 (fig. 8.22) is removed from a body front assembled with a beam 3 and arms for this purpose, turn off nuts of fastening of side 2 and forward 4 arms of a bumper. Turn out six screws and remove side arms from a bumper. Remove registration plate, having turned out two screws. Turn off two bolts and disconnect a beam with forward arms from a bumper. Examine a bumper, arms, a beam and if necessary replace them.
Carry out assembly and installation of a front bumper in the return sequence.

Fig. 8.23. Details of a rear bumper: 1 – facing of a bumper; 2 – beam; 3 – back arm

Before removal of a rear bumper disconnect electric wires from a lamp of illumination of registration plate. The rear bumper of 1 (fig. 8.23) is removed from a body back assembled with a beam 2 and arms 3. Turn off nuts of side fastening of a bumper to a body and nuts of fastening of arms and remove a bumper. Remove registration plate from a bumper and turn off bolts of fastening of a beam. Disconnect a beam with arms from a bumper. Examine elements of a bumper and fixture, at failure detection replace them.
You make assembly and installation of a rear bumper upside-down.