8.10.1. Removal and installation of a heater

Before removal of a heater disconnect a wire of "weight" from the rechargeable battery and merge cooling liquid from the cooling system.

Fig. 8.31. A heater with air ducts, nozzles of ventilation and levers of heating: 1 – heater assembled; 2 – protection cover; 3 – sealant; 4 – the air duct is forward; 5 – the air duct is back; 6 – the air duct is right; 7 – the nozzle is right; 8 – the air duct is side right; 9 – the nozzle is side right; 10 – the case is intermediate; 11 – the nozzle is central; 12 – draft of the gate of heating of a windshield; 13 – control levers heater; 14 – handle of control of the gate of heating of a windshield; 15 – handle of management of a heater; 16 – plate of symbols; 17 – handle of control of the gate of heating of legs; 18 – the air duct is right; 19 – air duct of heating of salon; 20 – draft of the gate of management of a heater; 21 – draft of control of the heater crane; 22 – heater crane; 23 – draft of the gate of heating of legs

Remove the dashboard (see the subsection "Dashboard") and facing of the tunnel of a floor then disconnect an air duct of 19 (fig. 8.31) of heating of salon.
Fig. 8.32. Heater details: 1 – left casing of the fan; 2 – heater electric motor; 3 – right casing of the fan; 4 – radiator; 5 – draft of the drive of the gate of heating of a windshield; 6 – gate drive lever internal; 7 – gate drive lever external; 8 – right casing of a heater; 9 – screw; 10 – gate of the channel of an obduv of legs; 11 – gate of management of a heater; 12 – the bringing hose; 13 – the taking-away hose; 14 – heater crane; 15 – lever of the drive of the gate of heating of legs; 16 – left casing of a heater; 17 – collar; 18 – the resistor is additional; 19 – the ring is sealing

Disconnect electric wires from the resistor 18 (fig. 8.32) and the electric motor 2 fans, bringing 12 and taking away the 13th hoses of the crane of a heater. Turn off two nuts of fastening of the crane on a guard of a front and remove a sealant of pipes of the crane. Turn off four nuts of fastening of a heater to a body and remove a heater with management assembled.
You make installation of a heater upside-down.