d8791262

5.4.2. Installation

You carry out installation of steering as it should be the return to removal taking into account the following:

Детали рулевого механизма
Fig. 5.4. Details of the steering mechanism: 1 – lath plug ring; 2 – basic plug of a lath; 3 – case of the steering mechanism; 4 – roller bearing; 5 – driving gear wheel; 6 – ball bearing; 7 – lock ring; 8 – protective washer; 9 – sealing ring; 10 – bearing nut; 11 – lock washer; 12 – boot; 13 – lath; 14 – protective cap; 15 – lath emphasis; 16 – sealing ring; 17 – lock ring; 18 – emphasis nut; 19 – collar; 20 – protective cover; 21 – internal tip of steering draft; 22 – connecting plate; 23 – lock plate; 24 – bolt of fastening of thirst for a lath; And — a tag on a boot; In — a tag on a case

– before installation of the steering mechanism establish a spoke of a steering wheel horizontally and combine tags "And" and "In" (see fig. 5.4) on a boot and on a case of the steering mechanism (the lyska on a shaft of a driving gear wheel has to be turned in the direction of the car to the right), and in this situation connect a steering shaft to shaft of a driving gear wheel;
– nuts of fingers of spherical hinges of drafts after tightening by a dynamometer key to a shplintuyta. If the cut of a nut does not coincide with an opening for the forelock, then tighten a nut on a corner smaller 60 ° for providing a shplintovka;

Рулевое управление
Fig. 5.1. Steering: 1 – sharovy hinge of a tip of steering draft; 2 – rotary lever; 3 – tip of steering draft; 4 – lock-nut; 5 – draft; 6, 11 – internal tips of steering drafts; 7 – finger of the spherical hinge; 8 – protective cap; 9 – insert of a spherical finger; 10 – bolts of fastening of steering thirsts for a lath; 12 – bracket of fastening of the steering mechanism; 13 – support of the steering mechanism; 14 – connecting plate; 15 – protective cover; 16 – lock plate; 17 – case of the steering mechanism; 18 – coupling bolt; 19 – connecting elastic coupling; 20 – lath; 21 – basic plug of a lath; 22 – the damping ring; 23 – rubber-metal hinge; 24 – facing casing (top part); 25 – steering wheel; 26 – lever of adjustment of provision of a steering column; 27 – arm of fastening of a shaft of steering; 28 – facing casing (lower part); 29 – intermediate shaft of steering; 30 – protective cap; And — the surface of the case of the spherical hinge; In — the surface of the rotary lever

– for simplification of installation of brackets 12 (see fig. 5.1), fixing the steering mechanism, grease rubber support 13 with omylovochny liquid;
– be convinced that the surface "And" (see fig. 5.1) is parallel to a surface "In".