d8791262

5.2. Possible malfunctions, their reasons and methods of elimination

Cause of defect
Elimination method
The increased free wheeling of a steering wheel
1. Weakening of nuts of fastening of spherical fingers of drafts
1. Check existence of the forelock, tighten nuts and their zashplintuyta
2. The increased gap in spherical hinges of drafts
2. Replace tips of drafts
3. Wear of rubber-metal hinges of drafts
3. Replace rubber-metal hinges or drafts
4. The increased gap between an emphasis of a lath and a nut of the steering mechanism
4. Replace worn-out details and adjust the steering mechanism
5. A side play in rivet connection of the elastic coupling of a shaft of steering
5. Replace rivets
Noise (knock) in steering
1. Weakening of nuts of fastening of spherical fingers of drafts
1. Check existence of the forelock, tighten nuts and their zashplintuyta
2. The increased gap between an emphasis of a lath and a nut of the steering mechanism
2. Replace worn-out details, adjust the steering mechanism
3. Weakening of fastening of the steering mechanism
3. Tighten nuts of fastening of the steering mechanism
4. Weakening of a bolt of fastening of the lower flange of the elastic coupling on a gear wheel shaft
4. Tighten a bolt of fastening of the lower flange of the coupling
Hard rotation of a steering wheel
1. Damage of the bearing of the top support of a rack of a suspension bracket
1. Replace the bearing or a support assembled
Hard rotation of a steering wheel
1. Damage of the bearing of the top support of a rack of a suspension bracket
1. Replace the bearing or a support assembled
2. Damage of the basic plug or emphasis of a lath of the steering mechanism
2. Replace the damaged details, put lubricant
3. Low pressure in tires of forward wheels
3. Establish normal pressure
4. Damage of details of spherical hinges of drafts
4. Replace the damaged details
5. Damage of details of a telescopic rack of a suspension bracket
5. Replace or repair a suspension bracket rack
6. Bearings of the top shaft of a steering column are damaged
6. Replace bearings
Lack of fixing of a steering column in a standard position
1. The lever of adjustment of situation the helmsman of a column rests against a facing casing
1. Remove a lock ring of the lever and the lever, tighten the adjusting plug and put on the lever in the necessary situation, check reliability of latching and functioning of the coupling device, establish a lock ring
2. The coupling bolt of the lever of adjustment of provision of a steering column is turned
2. Weaken or unscrew the adjustment lever from a coupling bolt and establish ledges of a head of a coupling bolt in a cut of the directing wheel shaft arm plate