5.1.1. Steering mechanism

Fig. 5.1. Steering: 1 – sharovy hinge of a tip of steering draft; 2 – rotary lever; 3 – tip of steering draft; 4 – lock-nut; 5 – draft; 6, 11 – internal tips of steering drafts; 7 – finger of the spherical hinge; 8 – protective cap; 9 – insert of a spherical finger; 10 – bolts of fastening of steering thirsts for a lath; 12 – bracket of fastening of the steering mechanism; 13 – support of the steering mechanism; 14 – connecting plate; 15 – protective cover; 16 – lock plate; 17 – case of the steering mechanism; 18 – coupling bolt; 19 – connecting elastic coupling; 20 – lath; 21 – basic plug of a lath; 22 – the damping ring; 23 – rubber-metal hinge; 24 – facing casing (top part); 25 – steering wheel; 26 – lever of adjustment of provision of a steering column; 27 – arm of fastening of a shaft of steering; 28 – facing casing (lower part); 29 – intermediate shaft of steering; 30 – protective cap; And — the surface of the case of the spherical hinge; In — the surface of the rotary lever

Fastens to a body front guard two brackets of 12 (fig. 5.1) on rubber support 13.
In a case 17 steering mechanisms on roller and ball bearings the driving gear wheel which is in gearing with a lath 20 is established. The lath is drawn in to a gear wheel by a spring through a ceramic-metal emphasis which is condensed in a case with a rubber ring. The spring rests against a nut with the lock ring creating resistance to a nut otvorachivaniye.
The ball bearing of a gear wheel is drawn in by a nut with a sealing ring. The nut is stopped in a case by a washer and closed by the boot got on a shaft of a driving gear wheel.
On a case of the steering mechanism and on a boot there are tags for the correct assembly of the steering mechanism.
The protective cap 30 is on the left side put on a case of the steering mechanism, from right — the pipe having a longitudinal groove napressovyvatsya. Through a groove of a pipe and an opening of a protective cover 15 there pass expansion plugs of rubber-metal hinges of internal tips of 6 and 11 steering drafts. Drafts of the steering drive fasten to a lath bolts 10 which pass through a connecting plate 14 and expansion plugs of rubber-metal hinges 23. Bolts by a lock plate 16 are fixed.