1.2.6. Management of ventilation and heating of salon

Fig. 1.7. Governing bodies of ventilation and heating of salon: 1 – heater electric fan switch; 2 – the air supply lever in a zone of legs of the driver and passengers; 3 – control lever heater crane; 4 – the air supply lever on a windshield; 5 – nozzle of an obduv of glasses of forward doors; 6 – switch of heating of back glass; 7 – side nozzle; 8 – central nozzles; 9 – a rychazhok of change of the direction of an air stream from the central nozzle; 10 – rychazhok of overlapping of the central nozzle; 11 – a rychazhok of change of the direction of an air stream from a side nozzle; 12 – rychazhok of overlapping of a side nozzle

Governing bodies of ventilation and heating of salon are shown in fig. 1.7.
Movement of the lever 2 it is possible to send an air stream as to a zone of legs of the driver and passengers, and through central 8 and side 7th nozzles in interior of the car. At turn of the directing shovels central and side snuffled rychazhka 9 and 11 the direction of an air stream changes. For heating of the arriving air move to the right the lever 3 which operates operation of the crane of a heater. If necessary it is possible to increase amount of the arriving air turning on of the electric fan by the corresponding mode the switch 1.
Movement of the lever 4 regulates intensity of an obduv of a windshield through the top cracks on the dashboard and glasses of forward doors through nozzles 5. For achievement of the maximum air stream close gates side and central snuffled rychazhka 10 and 12 and then move the lever 2 to the right, and the lever 4 to the left. For protection from fogging cold air is enough to direct of them to them, and for prevention of frosting — in addition to move the lever 3 to the right.
For protection of back glass from fogging and frosting by the switch 6 include its electrical heating.